H E L L B O U N D

[mnpctech]

Finished 12/19/2004

http://prudhoe.codeword.com/mnpctech/Hellbound/2005/HBPP2.jpg

http://prudhoe.codeword.com/mnpctech/Hellbound/2005/HBPP7.jpg

http://prudhoe.codeword.com/mnpctech/Hellbound/Blowhole/BHrevised/HBBH9.2wb.jpg

http://prudhoe.codeword.com/mnpctech/Hellbound/Dec19/HBlftfront.jpg


http://prudhoe.codeword.com/mnpctech/Hellbound/AGPpanel/AGPwb.jpg

http://prudhoe.codeword.com/mnpctech/Hellbound/AGPpanel/AGPpanelwb.jpg



The design inception
http://prudhoe.codeword.com/mnpctech/Hellbound/HBdrawing1th.jpg (http://prudhoe.codeword.com/mnpctech/Hellbound/HBdrawing1.jpg)


120mm AGP integrated into window design
http://prudhoe.codeword.com/mnpctech/Hellbound/HBdrawing2th.jpg (http://prudhoe.codeword.com/mnpctech/Hellbound/HBdrawing2.jpg)

After arriving back from customwatercuts (http://www.customwatercuts.com/)

http://prudhoe.codeword.com/mnpctech/Hellbound/HBwatercutth.jpg (http://prudhoe.codeword.com/mnpctech/Hellbound/Hellboundwindow.jpg)

Laying out tribal flame design w/ 1/8" vinyl tape
http://prudhoe.codeword.com/mnpctech/Hellbound/HBcutth.jpg (http://prudhoe.codeword.com/mnpctech/Hellbound/HBcut.jpg)

[fivecheebs]

WOW! That looks amazing:o....... as usual.

[scopEDog]

Hey that looks great Bill...very nice :). I have a quickie question for ya...I was looking into duplicolor metalcast red..does it stand on its own or is it sorta flat without the clearcoat on top?

[Starbuck3733T]

You are a sick, sick sick sick sick man!
I FSCKING LOVE IT!!!

[Edd]

<3 that blowhole.

[mnpctech]

Paint progress... think Lava & Devil tails
http://prudhoe.codeword.com/mnpctech/Hellbound/HBmbsideflamesth.jpg (http://prudhoe.codeword.com/mnpctech/Hellbound/HBmbsideflames.jpg)

cnc machined & polished aluminum 92mm blowhole grill.
http://prudhoe.codeword.com/mnpctech/Hellbound/HBTopth.jpg (http://prudhoe.codeword.com/mnpctech/Hellbound/HBTop.jpg)

At first, I painted bezel to match flames... boring!

So I grinded surface of alum bezel with rotary cutting disc
http://prudhoe.codeword.com/mnpctech/Hellbound/MGath.jpg (http://http://prudhoe.codeword.com/mnpctech/Hellbound/MGa.jpg)

http://prudhoe.codeword.com/mnpctech/Hellbound/MG1th.jpg (http://prudhoe.codeword.com/mnpctech/Hellbound/MG1.jpg)

http://prudhoe.codeword.com/mnpctech/Hellbound/MG2th.jpg (http://prudhoe.codeword.com/mnpctech/Hellbound/MG2.jpg)

http://prudhoe.codeword.com/mnpctech/Hellbound/MG3th.jpg (http://prudhoe.codeword.com/mnpctech/Hellbound/MG3.jpg)

Apply 2 coats of Duplicolor Metalcast Red, then polyurethane clear

http://prudhoe.codeword.com/mnpctech/Hellbound/HBbezel/HBbth.jpg (http://prudhoe.codeword.com/mnpctech/Hellbound/HBbezel/HBb.jpg)

http://prudhoe.codeword.com/mnpctech/Hellbound/HBbezel/HBb3th%20copy.jpg (http://prudhoe.codeword.com/mnpctech/Hellbound/HBbezel/HBb3.jpg)



http://prudhoe.codeword.com/mnpctech/Hellbound/HBbezel/HBb2th.jpg (http://prudhoe.codeword.com/mnpctech/Hellbound/HBbezel/HBb2.jpg)

more to come!


grind it, GRIND IT!

http://prudhoe.codeword.com/mnpctech/Hellbound/HBgrind/HBgrindth.jpg (http://prudhoe.codeword.com/mnpctech/Hellbound/HBgrind/HBgrind.jpg)

http://prudhoe.codeword.com/mnpctech/Hellbound/HBgrind/HBgrindath.jpg (http://prudhoe.codeword.com/mnpctech/Hellbound/HBgrind/HBgrinda.jpg)

http://prudhoe.codeword.com/mnpctech/Hellbound/HBgrind/HBgrindtoolsth.jpg (http://prudhoe.codeword.com/mnpctech/Hellbound/HBgrind/HBgrindtools.jpg)


http://prudhoe.codeword.com/mnpctech/Hellbound/HBgrind/HBgrind1th.jpg (http://prudhoe.codeword.com/mnpctech/Hellbound/HBgrind/HBgrind1.jpg)

http://prudhoe.codeword.com/mnpctech/Hellbound/HBgrind/HBgrind2th.jpg (http://prudhoe.codeword.com/mnpctech/Hellbound/HBgrind/HBgrind2.jpg)

http://prudhoe.codeword.com/mnpctech/Hellbound/HBgrind/HBsigth.jpg (http://prudhoe.codeword.com/mnpctech/Hellbound/HBgrind/HBsig.jpg)

[Vedder323]

DAMN!!! LOVE it dude! LOVE IT!!!

:eek: Amazing!

[Silverstrand]

This is definitly different. Quite interested to see how this turns out.

[mnpctech]

Nice translucent effect in direct sunlight :cool:


http://prudhoe.codeword.com/mnpctech/Hellbound/HBgrind/HBgrindAFT/HBgrindweb.jpg

[mnpctech]

Flames are done.

http://prudhoe.codeword.com/mnpctech/Hellbound/HBpaint/HBFlmWb.jpg

[gumby]

wow, that's all i can say, wow!:eek: :eek:

[Starbuck3733T]

Satan himself things you case looks evil. He's standing right here.

[gumby]

lol

[mnpctech]

Satan himself things you case looks evil. He's standing right here I hope at least he brought over the beer he stole from my fridge. Not like he would share it though :lol:

[Pug]

Most people would consider selling their souls to Satan for case-modding skills like Bill's.
Bill obviously just signed a contract to build him a case instead. :D

[shinji]

Most people would consider selling their souls to Satan for case-modding skills like Bill's.
Bill obviously just signed a contract to build him a case instead. :D
:D :D from all forms mpctech is my inspiration
their work are exelent :eek: :eek:

[mnpctech]

Thanks guys ;)

I should have updates on window panel soon.

Just placed order w/ performance-pcs (http://www.performance-pcs.com) for Red EL wire, 12" Red LED bar, Coolermaster and AC Ryan LED fans. I like using these guys cause they process orders quickly and painlessly

[gumby]

i used some el wire once, i am interested to see your approach.

[mnpctech]

i used some el wire once, i am interested to see your approach.
Ive never used it, but it looks like it could really set off the edges of bezel flames cuts

[mnpctech]

Panel progress

Shawdowed the red flames and cut-outs, installed Round Modders Mesh behind portions of window.

http://prudhoe.codeword.com/mnpctech/Hellbound/AGPpanel/AGPpanelwbth.jpg (http://prudhoe.codeword.com/mnpctech/Hellbound/AGPpanel/AGPpanelwb.jpg)

Round Modders Mesh painted Blood Red
http://prudhoe.codeword.com/mnpctech/Hellbound/AGPpanel/AGPmeshwbth.jpg (http://prudhoe.codeword.com/mnpctech/Hellbound/AGPpanel/AGPmeshwb.jpg)

120mm AGP fan (my favorite part)
http://prudhoe.codeword.com/mnpctech/Hellbound/AGPpanel/AGPwbth.jpg (http://prudhoe.codeword.com/mnpctech/Hellbound/AGPpanel/AGPwb.jpg)

[furious trout]

My word :eek: that is pretty special (as always) B)

[Starbuck3733T]

Just showed it to my two student techs: "Damn, that dude is great!"

[mnpctech]

^^^--- cool, more future modders ;)

ME: Hi, my name is Bill Owen and I have a fetish for blowholes.

ROOM: "Hi BILL!"

Well, they can be very stylish w/o losing functionality. I've always tried to do innovative or different approachs to them. Version 1.0 for Hellbound was cool, but just didn't grab me enuf.
Version 2.0 will utilize 2, 92mm cnc machined fan rings
FYI: fasteners are 8/32, x 1/4" stainless steel button head hex machine screws.
http://prudhoe.codeword.com/mnpctech/Hellbound/Blowhole/BHrevised/HBBH1wbth.jpg (http://prudhoe.codeword.com/mnpctech/Hellbound/Blowhole/BHrevised/HBBH1wb.jpg)
.5" Alum spacer sleeves
http://prudhoe.codeword.com/mnpctech/Hellbound/Blowhole/BHrevised/HBBH2wbth.jpg (http://prudhoe.codeword.com/mnpctech/Hellbound/Blowhole/BHrevised/HBBH2wb.jpg)
http://prudhoe.codeword.com/mnpctech/Hellbound/Blowhole/BHrevised/HBBH3wbth.jpg (http://prudhoe.codeword.com/mnpctech/Hellbound/Blowhole/BHrevised/HBBH3wb.jpg)
Alum Spinner for R/C Trucks by Pro-Line (http://www.pro-lineracing.com/proline/parts/6026/6026.html)
http://prudhoe.codeword.com/mnpctech/Hellbound/Blowhole/BHrevised/HBBH4wbth.jpg (http://prudhoe.codeword.com/mnpctech/Hellbound/Blowhole/BHrevised/HBBH4wb.jpg)
Fits beveled edge perfectly
http://prudhoe.codeword.com/mnpctech/Hellbound/Blowhole/BHrevised/HBBH5wbth.jpg (http://prudhoe.codeword.com/mnpctech/Hellbound/Blowhole/BHrevised/HBBH5wb.jpg)
I'm debating about painting top ring the Metalcast Red used on Bezel (w/o grinding it!)
http://prudhoe.codeword.com/mnpctech/Hellbound/Blowhole/BHrevised/HBBH6wbth.jpg (http://prudhoe.codeword.com/mnpctech/Hellbound/Blowhole/BHrevised/HBBH6wb.jpg)

[Psykotik]

Like the outer ringy bit, but with the spinner in place it looks a bit too much like a bath plug hole for my liking :wacko:

[mnpctech]

You guys got some wicked drain plugs then :D

I'm not commited to it. Is this how others feel about it as well?

[Knipex]

I love the shadowed flame work.

[Starbuck3733T]

I don't think it looks at all like a bath tub hair catcher, too wicked for that. dunno about welsh 'tubs though, could be different over there.

[mnpctech]

Maybe Satan's bathtub ;)

I found time to assemble the top blow hole. Gawd, the AC Ryan Orange w/ UV LED fan really gives off a nice fire-look effect.
http://prudhoe.codeword.com/mnpctech/Hellbound/Blowhole/BHrevised/HBBH9.2wb.jpg

http://prudhoe.codeword.com/mnpctech/Hellbound/Blowhole/BHrevised/HBBH7thwb.jpg (http://prudhoe.codeword.com/mnpctech/Hellbound/Blowhole/BHrevised/HBBH7wb.jpg)
Blackfire LED fan from performance pcs (http://www.performance-pcs.com/catalog/product_info.php?cPath=36_68&products_id=1359&osCsid=cdabc3e6919dae9b95065157492745c7)
http://prudhoe.codeword.com/mnpctech/Hellbound/Blowhole/BHrevised/HBBH8thwb.jpg (http://prudhoe.codeword.com/mnpctech/Hellbound/Blowhole/BHrevised/HBBH8wb.jpg)

http://prudhoe.codeword.com/mnpctech/Hellbound/Blowhole/BHrevised/HBBH9.0thwb.jpg (http://prudhoe.codeword.com/mnpctech/Hellbound/Blowhole/BHrevised/HBBH9.0wb.jpg)

http://prudhoe.codeword.com/mnpctech/Hellbound/Blowhole/BHrevised/HBBH9.1th.jpg (http://prudhoe.codeword.com/mnpctech/Hellbound/Blowhole/BHrevised/HBBH9.1wb.jpg)

[mrplow]

Are those rings taken from chrome tax disc holders? Cos I was looking at bunging some of those onto a case.

[dutchcedar]

Well sheeit, that is simply friggin' insane... :rant:

That side panel, well what the f*ck!!

And those fans, the shiznits!!

Maybe you need to be painting bikes... I'm beginning to think your work is too good for 'puters. :D

[Endo]

I dont know I would have to say I dont really like the spinner idea but when you turn the fan on and the lights reflect off it you cant take it off it completes it

[mnpctech]

Maybe you need to be painting bikes... I'm beginning to think your work is too good for 'puters.
lol, what a coincidence my buddy told me last night I need to divorce my wife, leave the kids and search for Apprenticeship under one of the Biker Build-off gods :D

whats a chrome tax disc holder?

[dutchcedar]

lol, what a coincidence my buddy told me last night I need to divorce my wife, leave the kids and search for Apprenticeship under one of the Biker Build-off gods :D
Well, mum's the word, but ya know that client of mine who's bikes I showed ya... he just got interviewed by Discovery Channel for the next build-off... so there's another coincidence. :blink:

But back to your H E L L B O U N D case... it's simply awesome.

[mnpctech]

Alright! Thats awesome dutch! Keep me updated cause i don't have cable

Thanks man!

[Starbuck3733T]

Your photography skills are getting better and better man - cuz that looks unreal.

[Dante]

I want to see the whole top, I see some teeth airbrushed on there and if I am not mistaken there is a skull of some sort attached to those teeth. Lets see it. Don't be shy.:D

[BuffaloBoy]

:eek: Amazing work, truly amazing. I wish my last painting project looked half that good.

[Pug]

Maybe Satan's bathtub ;)

I found time to assemble the top blow hole. Gawd, the AC Ryan Orange w/ UV LED fan really gives off a nice fire-look effect.
http://prudhoe.codeword.com/mnpctech/Hellbound/Blowhole/BHrevised/HBBH9.2wb.jpg
Geez... any doubts 'bout bath furniture dismissed dude. Carry right on. :cool:

PS. Dante - I think there was a pic further back if you check... ah no, tell a lie, sorry.
I'll let Bill hit you with it but put some padding on the bottom of your jaw ready for when you see it (& the sidepanels too)... :h34r:


[Edit] Tax disc = vehicle excise duty licence ... They're round over here an you can buy chromey holders like that for 'em.
...Regardless, it's the implementation that makes something what it is {thus spake the man who used a reject fan grille and a volvo speaker cover (found on the roadside) for a PSU mod. ;)}

[Dante]

yeah Pug I have seen it. it looks killer. Bill sent some pics along with an interview our readers did with him. And the pics of the whole case were included. It is simply beautiful. Now if I could only get Bill to sell it to me for $1. LOL:D

[fillip]

You got any completed piccies of this case? I noticed over on your own webby there's a full shot of it in the gallery section but nothing else for it as yet.

[mnpctech]

Not yet fillip. I'm waiting on 8 knobs I designed to come back from machinist. Once I've got those, it will ignite the fire to continue onward.

[Knipex]

Speaking of chrome tax disk holders....

I found these places a while back and see lots of interesting toys...

http://www.s-v-c.co.uk/SVCOTHERP.HTM

https://secure.visav.co.uk/avshop/products.asp

[mnpctech]

8 alum control knobs, 9 Red LEDs and Red EL wire were installed today.

HELLBOUND IS COMPLETE!


http://prudhoe.codeword.com/mnpctech/Hellbound/Dec19/HBlftfront.jpg

http://prudhoe.codeword.com/mnpctech/Hellbound/Dec19/HBfanc.jpg

http://prudhoe.codeword.com/mnpctech/Hellbound/Dec19/HBrghtfront.jpg

[Sinner]

how much does a case like that cost????

[mnpctech]

What would you pay for it Sinner?

[Sinner]

I just want the case none of the internals like fans and the such scine i have an abundance of those...but for the case...a few hundred I guess....give an idea of what you would like to see the case fetch and I'll tell you.

[Starbuck3733T]

Bad assssssssssssss!

I'd say that's probably 800 to 2000 (big range, i know).

[Silverstrand]

This turned out alot better than I originally thought it would. Good work mate.

Oh, and nice autographed poster of Fast and the Furious.

[zer0]

wow where did you find those knobs.

[scopEDog]

Now THAT is pimpalicious...fantastic! I love the paintjob and top exhaust, excellent work!

[Blooz]

Great job, Bill!

I especially like that texturing on the front - very different, but looks semi-easy to do! (Not taking anything away from your effort - just a comment while thinking about it...)

I'm undecided about the spinner thingy - I kinda like the blowhole without it! I have to agree that your photography skills are getting better - that's a great "money shot" showing off the lighting from the fan!

That's really an intricate design on the side panel. How long did it take you to just figure all of that out? Do you lay that out in a CAD program to get it water-jetted?

[fivecheebs]

Man i'd hate to be a customer of yours bill ;) I mean, usually its an easy decision of where to put your case at your desk, i mean the window is what you want to see right? Well normally you dont have such a kick ass left panal, I couldn't bring myself to hide that skull, its amazing.:eek: The light flame cutouts on the front have a really interesting effect too, me likey :wub:

[$ilent\\'@rrior]

Bill you are a GOD and we all bow down to your Case Mod Skills.

That case is far better than the one you have in the latest CustomPC mag here in England

:lol:^_^ :cool:

[Fibbles]

Is there any reason you didn't paint over or remove the faux carbon fiber?

[JBM]

That is one nice case there Bill ;)

[mnpctech]

Thanks all!

wow where did you find those knobs.

Made in cnc machine from .5" diameter solid aluminum rod.

I especially like that texturing on the front - very different, but looks semi-easy to do!

Its very easy to do.. And the effect is awesome. Ground metal painting has been around since the 50s. Yuo have to use the Anodize effect paints like metalcast, otherwise you don't get the translucent effect. Honestly, grab an case panel, sand it down to the bare metal, grab an angle grinder or dremel, put on safety glasses and have fun!


How long did it take you to just figure all of that out? Do you lay that out in a CAD program to get it water-jetted?

I'm guessing 3hrs to sketch. I prefer sketching by hand over using drawing programs. Its quicker for me. Then I'll scan it, save as jpeg, and clean up the edges for Chris, who then traces it into CAD program for the waterjet.

@ cheebs, I envision the case residing the workshop of somebody like the guy dutch is designing the house for. The inspiration devired entirely from Choppers.

That case is far better than the one you have in the latest CustomPC mag here in England

lol, it took half as long as the Floyd case. whats up wit dat?!

Is there any reason you didn't paint over or remove the faux carbon fiber?

That top trim piece is plastic. I initially thought I need to do something about this, but it didn't bother me anymore. Actually I thought Dr. Fibbles would really want to stay ;)


My case mods are going through a realm of weirdness as you've witnessed. Odd looking protrusions like the blow hole rings and bullet knobs. I've been pretty conservative up to this year. I need to go back and finish some unfinished projects (Excalibur and Psychosis) and then move into building something from the ground up. I have no idea as to what I'll do, but I feel I must.
Otherwise I'm starting to feel "boxed in" w/ just case modding..(no pun intended)

[Canada_Dry]

I would like to see your take on an old desktop case. I am currently modding a 1997 gateway, and am about done with it. Not a heavy mod, just paintjob, new components (obviously) and windows. I think you could make a really kick ass one.

Gateway Mod (http://www.xoxideforums.com/showthread.php?t=49697)

p.s. I would pay 600+ for the Hellbound Case

How much did it cost to watercut that? I am planning to have the cooler master logo water cut on my case, but have no clue on what its going to costs. All I know is its at least 15 dollars for the cad drawing B).

[Sinner]

mnpc- I'm in the process of looking for someone to build a ground up case. got the thing all sketched up in sketchup3D. If your looking for a commisioned ground up project that is. I would need the whole case cut and painted and all the internals i can apply myself. tell me if you wouldnt mind at least quoting the project for me.

[mnpctech]

I would like to see your take on an old desktop case.

I'm muddling around with Silverstone LC03 HTPC cases, thats close ;)

How much did it cost to watercut that?

I send customwatercuts (http://www.customwatercuts.com) a lot of my work and also refer them on my site so I get wholesale pricnig. The best thing is just send them your design and ask.

I am planning to have the cooler master logo water cut on my case, but have no clue on what its going to costs. All I know is its at least 15 dollars for the cad drawing

$15 is good. I know we've charged $50 at times.

mnpc- I'm in the process of looking for someone to build a ground up case. got the thing all sketched up in sketchup3D. If your looking for a commisioned ground up project that is. I would need the whole case cut and painted and all the internals i can apply myself. tell me if you wouldnt mind at least quoting the project for me.

So I take it youre no longer interested in buying Hellbound.

Send the designs and specs via PM.

[Sinner]

oh no i would! you said its already bid on though or at least spoken for.

[fillip]

Otherwise I'm starting to feel "boxed in" w/ just case modding..(no pun intended)

Does that mean you'll soon be turning your back on us case modders? :unsure:

:(

[Canada_Dry]

come w/ my mnpc,

Ill show you the world of video game modding ^_^

[mnpctech]

Does that mean you'll soon be turning your back on us case modders?

Never. Modding and Case Modders are now my livelyhood. I'd like to build something from ground up is all.

[fillip]

Never. Modding and Case Modders are now my livelyhood. I'd like to build something from ground up is all.
An 'artwork mod' as I call 'em rather than a case mod per se.

[Knipex]

Never. Modding and Case Modders are now my livelyhood. I'd like to build something from ground up is all.
Bill

Have you gane full time as a modder ?????

Didnt realise you had but congrats man and good luck....

[Starbuck3733T]

Holy crap bill, way to go man!

[mnpctech]

Have you gane full time as a modder?????

No, I still work another job so Mrs can stay @ home w/ kids. Slowly, but surely though... I hope

[$ilent\\'@rrior]

lol, it took half as long as the Floyd case. whats up wit dat?!

Nothing wrong with 'The Wall' Case just my own personell preference
sorry if I have offended you.

If you have any 'Flame' jpegs lying around that you dont need any chance of a copy??:)
Would like to cut out the side of my Chieftec dragon and have flames detail along with a side window/modders mesh.

While i'm on the subject what colours go well with a Purple Chieftec Dragon Case????

[mnpctech]

Offend me? ...lol

I may have a simple flame stencil I made awhile back. If you don't see it posted here by weekend, I didn't find it.

Purple w/ Orange flames ...hint of Yellow at base of flames

[$ilent\\'@rrior]

Offend me? ...lol

I may have a simple flame stencil I made awhile back. If you don't see it posted here by weekend, I didn't find it.

Purple w/ Orange flames ...hint of Yellow at base of flames
WOW thanks for that.
Is there any chance of getting some of your cases large enough so as to have them a wallpaper image for a PC?

Thanks for the help/advice ^_^ ^_^

[mnpctech]

You can try copying and altering these into stencils

Venom Flame (http://prudhoe.codeword.com/mnpctech/aWIZB/FlameDesigns/WizDflame1.jpg)

Deuce Flames (http://prudhoe.codeword.com/mnpctech/aWIZB/FlameDesigns/WizDflame3.jpg)

Venom flame sketch (http://prudhoe.codeword.com/mnpctech/aWIZB/FlameDesigns/WizDflame2.jpg)


Photos for Wallpaper

The Deuce (http://prudhoe.codeword.com/mnpctech/1PR/mnpctech.comDeuce.jpg)

Hellbound (http://prudhoe.codeword.com/mnpctech/1PR/mnpctech.comHellbound.jpg)

[$ilent\\'@rrior]

You can try copying and altering these into stencils

Venom Flame (http://prudhoe.codeword.com/mnpctech/aWIZB/FlameDesigns/WizDflame1.jpg)

Deuce Flames (http://prudhoe.codeword.com/mnpctech/aWIZB/FlameDesigns/WizDflame3.jpg)

Venom flame sketch (http://prudhoe.codeword.com/mnpctech/aWIZB/FlameDesigns/WizDflame2.jpg)


Photos for Wallpaper

The Deuce (http://prudhoe.codeword.com/mnpctech/1PR/mnpctech.comDeuce.jpg)

Hellbound (http://prudhoe.codeword.com/mnpctech/1PR/mnpctech.comHellbound.jpg)Thanks the Deuce flames are the ones I will try to alter to Suit my needs.
thanks also for the Wallpapers.
I just Love the Hellbound Case that it one Awesome PC Case.
I think if you took that to a LAN party you would win without even turning your monitor on.....Thay would all run for the hills...Hehe:D

[GodsUnicorn]

Any chance of a few tips on air brushing,, I've never tried it before but would love to give it a go.

[mnpctech]

Any chance of a few tips on air brushing,, I've never tried it before but would love to give it a go.

Lin is mnpctech's resident Airbrush Gawd.

I've got something special planned to catch our elusive Lin in action later this year ...and yes, share some tips as well

[Silverstrand]

Lin is mnpctech's resident Airbrush Gawd.

I've got something special planned to catch our elusive Lin in action later this year ...and yes, share some tips as well
Air Brushing tutorial video? :rolleyes: