Temperatures

[Kickass]

Hi what are peoples temperatures like, overclocked and standard and what gear do you use.

To start, i use koolance exos intergrated into my xaser 3, with 2 cpu 200g blocks, amd mp 2400+ x 2 in series @ 46 deg and 42 (OCed to AMD 2600+ Running Seti @ Home)

[Starbuck3733T]

Corrected idle at 32*C, corrected load at 39*C. All depends on how I have the fans set to ramp up too. water temperatures max out at 3*C above ambient.

[Fibbles]

I have no idea what my water temp is or my flow rate (still need my Aquaaero :) ). My CPU temp has been mostly living at 39° idle with no overclock. Load temps are in the mid 40's, but I answered based in idility (^_^ )

[Da_Rude_Baboon]

42C under load.


I once had a CPU running at 91C, (not water cooled i hasten to add!) and its still going strong! :lol:

[Darv]

Problem is that no motherboard temp sensors are accurate.

But according to MBM my diode temp at the moment it 30C.

[Kickass]

I use manual temprature sensors, that way i know they are correct.

Please post on idle temps if thats easiast for ya :)

[Fibbles]

Problem is that no motherboard temp sensors are accurate.

But according to MBM my diode temp at the moment it 30C.
True, supposedly (and supposedly according to Abit) the Max 3 is off by up to 9 - 12°. MBM and my bios give completely different reading, my temps are lower in my bios too, but since I hate restarting to find out what it says, I rarely do it. Besides, I tend to forget to hit DEL, even when I intend to -_-

[Olly]

About 32 deg Celcius idle, via diode and MBM .........

Olly

[Psykotik]

Athlon XP 2500 on Asus A7N8X Deluxe Rev 2, overclocked to 2420 Mhz (11 x 220) 1.775v

58 degrees idle- 62 loaded (Prime 95 after 24 hours) according to diode temp in MBM5. Socket is always around 42

Mobile XP 2500 on Abit NF7 S Rev 2, overclocked to 2700 Mhz (225 x 12)

Currently out of action due to me not wanting to ry the arse off it, as I have yet to implement all my mods to the case its going in, and still need to get me secondary loop off Pug.
(although I now am the proud owner of 3 D Tek branded CSP 750 pumps :D)
but it was idling at about 49, and under load pushing 60. Nothing to do with 2v up its arse, honest.

[J-Pepper]

only got figures of my ex-rig.

1800XP @ 2.5GHz 42deg idle, 47 load, delta circa 16deg at idle.

1.875Vcore, 1.9Vchipset, Ti4200 o/c

DD Maze4 CPU, DD Maze4 GPU, DD Z-Chipset, HE120.1 rad

Dunno what i'll get with new current build rig

[N4N01D]

about 40-41 idle and about 50 load, room temp is 24-25... you may think thats high but its a 2500m barton running at 2500mhz so i think its sorta justified :)

[FastRedPonyCar]

my p4 is clocked from 2.4 to 3.3 ghz. Idle is 30*C according to mbm5 and 38*C load. I have a Swiftech cooling setup with a single 80mm black ice rad and a dual 80mm black ice rad. All the fans are vantec stealths so the cooling could be much better but I enjoy being able to sleep at night with the computer on.^_^

AMD xp2600 mobile is clocked to 2.4 ghz and it idles at 40*C but the gigabyte mobo's read MUCH higher than others. In fact, i had the same cpu/hsf combo on the nf7-s2 and it was idleing at 31*C according to the bios at the same clock frequency.

[Knipex]

MBM reports 32 degrees idle Athlon 64 3400 at stock...

[Rally]

A64 3000+ and an X800XT @ stock speed. 3/8" PolarFlo blocks with a BIX rad.

CPU runs between 26-30 idle and 28-37 loaded. Vid card stays a couple degrees cooler than the CPU.