Fitting a 120.1 Rad [Archive]

richman

27th January 2005, 18:11

Hi,

Iam planning on ordering my case and having the 120mm hold cut into it before it ships. What i would like to know is would a 120mm hold in the top of my case be ok to hold a radiator I would also have a fan attached and a grill on the visible side.

Rich

Fibbles

27th January 2005, 18:45

Yep, it will hold allright. I've got an Aqua Computer Airplex EVO 240 cut into the top of my aluminum case with no problems, and I've had this configuration for over a year and a half now.

richman

27th January 2005, 19:43

Yep, it will hold allright. I've got an Aqua Computer Airplex EVO 240 cut into the top of my aluminum case with no problems, and I've had this configuration for over a year and a half now.
Just a standard 120mm hole?

Rich

Da_Rude_Baboon

28th January 2005, 09:51

I have a standard 120mm hole works fine. At some point i'm going to re-cut it with a jig saw to match the AC grill as i dont like seeing the round hole under the square grill.

Fibbles

28th January 2005, 09:58

Just a standard 120mm hole?

Rich
Depends on what you want. See below.

I have a standard 120mm hole works fine. At some point i'm going to re-cut it with a jig saw to match the AC grill as i dont like seeing the round hole under the square grill.
I cut mine to match the AC grill, for the same reason you've stated.